How do I fix error 59 F0 on HP?

ByEditor

How do I fix error 59 F0 on HP?

Usually, for 59. F0, it is recommended to try resetting the toner and the fuser assembly. Reset the printer using the power switch, turn off the printer for a few minutes. Turn on the printer and wait for the HP colour jet printer to revitalise.

What does 59 fo error mean?

What is HP Printer Error 59. F0? This error happens when there is a problem in the internal motor of the printer. The main reason behind this error is the failure in transfer alienation. Transfer alienation failure means a situation where the ITB is stuck and cannot rotate.

How do I reset my HP printer ITB?

Now you can reset the New Transfer Kit setting At the control Panel, press the Home button. Open the “Administration” menu, then choose “Manage Supplies”. Select the “Rest Supplies” option, and then choose “New Transfer Kit.” Use the Down Arrow button to highlight the word “Yes”, and then press Ok to select it.

What is the ITB on a printer?

At times, it is necessary to ship an Intermediate Transfer Belt (ITB) that has been used in a printer for a period of time. Most often, this is because HP has requested the part be returned for evaluation.

What is a 59 Co error HP printer?

C0 = Developer motor rotation error. With this printer it usually means the product needs to be replaced. What you can try is to remove all toners and then start up the printer and see if the error appears.

How do I fix Error 59 on HP m477fdw?

The 59. F0 has been a common error code on the HP CLJ M452 and M377 / M477 MFP models. The printers service manual references this error to a “drum motor assembly” but in most cases has been resolved by replacing the Transfer Belt assembly (RM2-6454).

How do you reset the fuser on a HP CP4525?

HP Color LaserJet CP4525 reset the fuser page count Basically all you must do is install a replacement fuser from us, then turn on your printer, and the power-on process will automatically reset the page count for you.

How do I reset my HP CP4525?

Press the “home” button. Press the “down arrow” button to highlight CONFIGURE DEVICE and select “ok” Pres the “down arrow” button to highlight the RESET menu and press “ok” Press the “down arrow” button to highlight RESTORE FACTORY SETTINGS and then press “ok”

How do I know if my transfer belt is bad?

Printer Defects related to bad transfer belt

  1. Registration errors.
  2. Blurring print.
  3. Spotting.
  4. Color fringing.
  5. Light or dark streaks on edges.
  6. Faded Print.
  7. Repeated defects.
  8. Long Toner line on black polymer belt may mean the belt or wipe needs replacement.

What is a 59 fo error HP m477fnw?

The 59. F0 error is typically the result of a small sensor switch inside the ITB (Intermediate Transfer Belt) assembly that is not working correctly. It will have variable amounts of resistance as it is activated during the course of operation and causes the error.

How do I reset my HP printer?

1 Restore Defaults

  1. From the screen on your printer, navigate to Setup.
  2. Tap Tools.
  3. Tap Restore Defaults.
  4. Tap Yes.
  5. The printer will restart.
  6. Once restarted, your printer will have been reset to factory default settings.