How do I backup my Brocade zone config?

ByEditor

How do I backup my Brocade zone config?

Backing up a Brocade switch

  1. Establish a putty session to the switch and login as normal.
  2. Enter the command configupload.
  3. At the protocol selection prompt choose the protocol appropriate for you FTP server.
  4. At the IP Address prompt enter the IP address of the FTP server Server Name or IP Address [host]: 10.10.10.5.

How do I save my Brocade config?

How to take backup of Brocade Switch configuration file in local…

  1. To take backup of configuration file first login into Switch by using admin account.
  2. Give configupload command.
  3. It will ask you host details in which server you want to save the configuration file.

How do I restore config file in Brocade switch?

Pages

  1. Check FTP service is running on the server where the backup configuration file is stored.
  2. Connect to the switch using an administrator account.
  3. Disable the switch by entering the switchDisable command.
  4. Enter the configDownload command.
  5. Enter switchEnable command once the process is finished.

How do I enable ports on my Brocade switch?

To enable a port:

  1. Connect to the switch and log in as admin as described in Connect to the Command Line Interface.
  2. Issue the portenable portnumber command, where portnumber is the number of the port you want to enable.

How do you zone in Brocade command line?

How to create zones from CLI on a Brocade SAN Switch

  1. admin> switchshow.
  2. Note:Any devices that connect using NPIV use nsshow command to find the WWPN addresses logged in to the port.
  3. 2.Run the cfgshowcommand.
  4. admin> cfgshow.
  5. cfgshow will display the configuration and how the zoning is currently configured.

How do I reset my Brocade SAN switch?

In the CommandCentral Storage Console, display the Switches Summary (Managing > SAN > Switches.) In the table, click the name of the Brocade switch whose configuration you want to restore. In the drop-down list in the switch’s Overview pane, click Restore Switch Configuration and click Go.

How to backup Brocade SAN switch configuration?

How to backup Brocade SAN Switch configuration? In this article, i am describing how we can achieve this in one of the Brocade SAN switch. We need an FTP server to take backup of SAN Switch. I have an IIS server and acting as an FTP server as well. You can use any of the free FTP software to do this. And the backup will be storing at E:FTP folder.

How to take backup of configuration file in switch?

To take backup of configuration file first login into Switch by using admin account. Give configupload command. It will ask you host details in which server you want to save configuration file.

How to take backup of San switch using FTP?

We need an FTP server to take backup of SAN Switch. I have an IIS server and acting as an FTP server as well. You can use any of the free FTP software to do this. And the backup will be storing at E:FTP folder. Server Name or IP Address [host]: 192.168.1.1

What makes Brocade switches so popular?

Presentations References RSS Backing up Brocade switch configurations Brocade switches have become one of the most widely deployed componets in most Storage Area Networks (SANs). One thing that has led to Brocade’s success is their robust CLI, which allow you to view and modify almost every aspect of their switch.